Big Macks 3D

← Back to catalog

Modular Drawer Stand for CoreXY Printers

Modular Drawer Stand for CoreXY Printers

A stand that lifts your printer with a flat-bottomed or Gridfinity drawers tucked underneath. It takes no extra bench space — practical and good-looking.

$5.00

A modular drawer stand that lifts your printer off the bench so a bed-sized drawer tucks into the space underneath. It's sized to your exact printer from its own measurements — choose the height and drawer style and the parts generate on demand. Stacks with a second stand or a plate rack.

Configure & buy

The gap under a CoreXY printer is the most wasted space on the bench. This closes it: your printer sits up on four feet, and everything below becomes a drawer for nozzles, spare hotends and hex keys.

Dimensions come from your machine rather than a generic footprint, so the frame meets its feet and the drawer fills the width. Stack a second stand on top when one stops being enough.

Highlights

Fits your printer

Pick your printer — or add its measurements — and the frame, feet, and drawer are dimensioned to it.

Illustrated assembly guide

A step-by-step PDF — every part named and hidden sockets shown, so it goes together right the first time.

Auto-sized drawer

Choose the bin height; the drawer auto-fits your printer's bed.

Stackable

Stack two drawer stands, or combine with a plate rack, to build the height you want.

Print-ready files

Color-sorted 3MF plates, every STL, and a parts list.

Gallery

A Gridfinity drawer tucks under the printer, which rests on the stand's feet.
A Gridfinity drawer tucks under the printer, which rests on the stand's feet.
The stand lifts the whole printer, reclaiming the space beneath for storage.
The stand lifts the whole printer, reclaiming the space beneath for storage.
The whole stand assembling itself, in the order the guide gives: the front bar, then the back built as its own piece and offered up, then the side rails, the feet, and the drawer sliding home.
The whole stand assembling itself, in the order the guide gives: the front bar, then the back built as its own piece and offered up, then the side rails, the feet, and the drawer sliding home.

Configure & buy

In your download

  • Print-ready 3MF platesEvery part laid out on plates packed to your printer's bed and sorted by filament color — open in your slicer and go.
  • Every STLThe individual part meshes as well, if you'd rather arrange the plates yourself.
  • A parts listA manifest of every part and how many of each, so you know exactly what you're printing.
  • An assembled 3D model in your colorsThe whole thing built and colored the way you configured it — your reference while you print and put it together.
  • An illustrated assembly guideA step-by-step PDF, grouped so you build one color at a time, naming every clip.

Configure your stand

We’ll split the parts to fit this printer’s own bed. Printing it on a different machine? Pick yours in the header and we’ll split them for that bed instead.

Tell us which printer this stand goes under — pick it above, or add it below — and we’ll size the stand to fit it.

Don’t see your printer? Add its measurements

We build each stand to fit an exact printer. If yours isn’t measured yet, give us four measurements — and its bed size if it’s not listed — and we’ll have your stand ready, and remembered for the next person with the same machine.

Add your printer

We size every model to your printer, so we need to know how big it can print. It’ll be saved for the next person with the same machine.

These are the printable sizes — the biggest part your printer can actually make, the numbers your slicer shows as the build volume. Not the bed or the removable plate, which are usually a little bigger.

Optional — build plate and printer-stand measurements

The build plate is the removable sheet you pop prints off; it’s usually a little bigger than the printable area. A plate rack is cut to the sheet, not the bed.

A printer stand is built around your printer’s feet. Give us all four and we can build you one — or skip them and add them later. Measure the BASE — the slab it stands on — not the machine’s widest point. Gantry legs, Z columns and X arms usually overhang the base and hold up nothing.

Where to measure your printer's feet Looking down on the printer's base with the front at the bottom. A is the full width of the base across the front. B is the diameter of one foot. C is from the base's front edge back to the center of the front foot. D is from the base's side edge in to that same center. FRONT rear feet — not needed A D C B
Looking down on the base, front at the bottom.

Choose your colors

Every model on the site opens in these three. Primary is the largest surface, secondary the part that contrasts with it, and tertiary the accent — feet, trim, the parts that tie it together.