Plate Rack Stand for CoreXY Printers A stand that lifts your printer and racks your build plates underneath — dimensioned to your exact machine. $5.00 A plate-rack stand that lifts your printer off the bench so your build plates slot into the space underneath. It's sized to your exact printer from its own measurements — choose how many plate slots and the parts generate on demand. Stacks with a second rack or a drawer stand. Configure & buy Swapping plates mid-session usually means leaning a warm sheet against the wall. Here they lie flat in slots below the printer — separated, cooling, one hand away.Your printer stands on the frame, and the racking occupies the volume its legs already claim, so it costs you no bench at all. Slot spacing follows your machine’s measurements, and the parts are generated to print on the very bed they end up beneath. HighlightsFits your printerPick your printer — or add its measurements — and the frame, feet, and slots are dimensioned to it.Illustrated assembly guideA step-by-step PDF — every part named and hidden sockets shown, so it goes together right the first time.As many slots as you needChoose the plate-slot count and the rack is generated to hold them.StackableStack two racks, or combine with a drawer stand, to build the height you want.Prints on its own bedParts are split to fit the very printer the stand is built for.Print-ready filesColor-sorted 3MF plates, every STL, and a parts list. GalleryPlate rack stand in Creality colors under a K2 Pro with the plates partly outBuild plates store in the rack beneath the printer, which rests on the stand's feet.The plate rack stand in Creality colors under a K2 Pro with the plates fully stowed.The stand lifts the whole printer, with build plates stored below.Creality colors under a K2 ProSide view of the plate rack stand in Creality colors under a K2 ProThe rack going together the way the guide has it: the slats stack into the front bar, the rear is built and brought forward, and a clip locks every seam as it closes. The gaps left between the slats are the plate slots. Configure & buy In your downloadPrint-ready 3MF platesEvery part laid out on plates packed to your printer's bed and sorted by filament color — open in your slicer and go.Every STLThe individual part meshes as well, if you'd rather arrange the plates yourself.A parts listA manifest of every part and how many of each, so you know exactly what you're printing.An assembled 3D model in your colorsThe whole thing built and colored the way you configured it — your reference while you print and put it together.An illustrated assembly guideA step-by-step PDF, grouped so you build one color at a time, naming every clip. Configure your stand This stand goes under Choose a printer…Kobra 3Kobra S1Kobra S1 MaxA1A1 miniH2DP1PP1SP2SX1 CarbonX1EEnder-3 V3HiK1K1 MaxK1CK2K2 PlusK2 ProK2 SECentauri CarbonNeptune 4 MaxNeptune 4 ProCORE OneCORE One LMINI+MK4SMy printer isn’t listed… We’ll split the parts to fit this printer’s own bed. Printing it on a different machine? Pick yours in the header and we’ll split them for that bed instead. Tell us which printer this stand goes under — pick it above, or add it below — and we’ll size the stand to fit it. Don’t see your printer? Add its measurements We build each stand to fit an exact printer. If yours isn’t measured yet, give us four measurements — and its bed size if it’s not listed — and we’ll have your stand ready, and remembered for the next person with the same machine. Measure your printer